More Mechanical Engineering Project topics

More Mechanical Engineering Project topics.

• 3 axis digital accelerometer
• 3d-kinematics of biological joints
• 4-wheel independent suspension
• A clean biodiesel fuel produced from recycled oils and grease trap oils
• A double-wall reactor for hydrothermal oxidation with supercritical water flow across the inner porous tube
• A fluid-solid interaction model of the solid phase epitaxy in stressed silicon layers
• A hypersonic hybrid vehicle
• A managtoreological semi active isoolator to reduce noise and vibration transmissibility in automobiles
• A theory of anharmonic lattice statics for analysis of defective crystals
• Abrasion wear characteristics of sand cast al-7075
• Abrasive blast cleaning
• Acoustic parking system (aps)
• Active control of near-wall turbulent flow
• Active electrically controlled suspension
• Active roll-over protection system in automobiles
• Active suspension system a mechatronic system
• Advanced diesel common rail systems for future emission legislation
• Advanced energy conversion systems
• Advanced internal combustion engine research
• Advanced safety features in nuclear reactors
• Advances in capillary fluids modeling
• Advances in cutting tool technology
• Advances in gas turbine
• Advances trends in manufacturing technology optical fiber sensors in medicine
• Aems automotive engine management system using meqa squirt kits
• Air bearing next generation bearings
• Air cushion vehicles
• Air pollution from marine shipping
• Air powered car
• Alternate fuel cells for automobiles
• Alternative abrasive to diamond
• Alternative fuel vehicles
• Alternative fuels hydrogen in internal combustion engines
• Alternative system to the domestic refrigerating system
• An electronic system for controlling air/fuel ratio of gaseous fuelled engine
• An expert system – based design of 3-dof robot
• Analysis and design methods of distributed sensor
• Analysis of material using digital radioscopy
• Antilock braking system
• Aqua silencer – a noise & emission controller
• Arcjet rocket
• Aspheric lenses
• Assembly of water cooler
• Atkinson cycle engine
• Atomic battery
• Atomistic characterization of dislocation nucleation and fracture
• Auto drilling with geneva
• Automated gray water recovery system
• Automatic automotive block heater connection
• Automation and robotics
• Automobile ac by utilising waste heat & gases
• Automobile air conditioning
• Automobile braking systems
• Autonomous submarines
• Babbitt metal
• Ball piston engine
• Ball piston engine a new development in rotary engines
• Battery electric vehicle
• Bench top wind tunnels
• Bike of the future- pneumatic bike
• Bio-diesel – the next generation fuel source
• Bio-ethanol as fuel
• Biogas
• Biologically inspired robots
• Biomass fuelled power plant
• Biomass gasification
• Boosting gas turbine energy efficiency
• Bose suspension system
• Breakthroughs in engine efficiency
• Caged ball technology
• Camless engine with elctromechanical valve actuator
• Carbon fibre on f1 cars
• Ceramic hybrid ball bearing
• Cfd analysis of a simple convergent flow using ansys flotran 10.0
• Challenges in plasma spray assembly of nanoparticles to near net shaped bulk nanostructures
• Coded modulation techniques for direct-detection
• Collision warning system
• Combustion control using optical fiber
• Common rail direct injection (crdi) engines
• Comparison of experimental and finite element results for elastic plastic stress
• Compresed air cars technology
• Concentrating solar power energy from mirrors
• Condition monitoring of bearings by echo pulse method
• Constitutive modelling of shape memory alloy using neural networks
• Contactless energy transfer system
• Corrosion resistant gear box
• Cross hybrid source routing protocol for wireless adhoc networks
• Data fusion for quality improvements in complex solar cell manufacturing processes
• Deformation-assisted transformations in nanocrystalline and amorphous alloys
• Dendritic solidification using phase-field method
• Desert cooler
• Design and development of modified operational controls on single mold machine
• Design and development of weeding machine
• Design and fabrication of artifically engineered material composites for electromagnetic systems
• Design for manufacturing – a giant lip in world class manufacturing
• Design of a medical device and its network for generating
• Design of an active car chassis frame incorporating magneto rheological fluid
• Design of automated guided vehicles for flexible manufacturing systems
• Development in arc welding process using robot
• Development of an agv material. Development of high performance
• Development of an ultrasound sensor for high energy medical applications
• Diffusion flame shapes and thin filament diagnostics
• Digital water marking for color images using dwt and its applications
• Ductile mixed-mode fracture criterion development and crack growth simulations
• Dynamics of cutting viscoelastics materials
• Effecient pnumatic motor design (compressed air energy recovery system)
• Embedded applications design using real-time
• Evaluation of high-power endurance in optical fiber links
• Experimental characterization and numerical modeling of a float glass furnace
• Fadec – full authority digital engine control.
• Finite element analysis of robotic arm for optimal work space determination
• Friction welding of austenitic stainless steel and optimizatin of weld quality
• Frictionless compressor technology
• Full colour 3d modelling using rapid prototyping
• Functional nanocrystalline ceramics
• Fused deposition modelling
• Gas hydrates: alternative for natural gas in future
• Gear noise reduction by new approaches in gear finishing processes
• Heat pipes for dehumidification and air conditioning
• Heat recovery steam generator (hrsg)
• Heat recovery system for internal combustion engine. (steam or likewise)
• Job scheduling using neural network foe rapid manufacturing
• Laser micromachining
• Latest in hitech petrol fuel injection gdi (gasoline direct injection)
• Magnetorhilogical semi-isolator to reduce noise and vibration transmibility to automobile
• Mechatronic strategies for torque control of electric powered screwdrivers
• Micro scale regenerative heat exchanger
• Microscale breaking waves and air-sea gas transfer
• Micro-scale milling
• Modeling of circulatory system and adventure in computer
• Modelling of circulatory system
• Modern centrifugal compressors
• Moulds in casting of plastics and thermoforming
• Multifunction control system for robotic fire detection
• Multiple material milling platform
• Nanocrystalline thin-film si solar cells
• Nanoventions micro-optic modeling and control of micro-scale systems
• Nauticus machine calculatons
• New finite element analysis for unsteady 3d natural convection
• Nuclear power potential as major energy source
• Ny-tran – alternative to v belts
• Optimizing centrifugal pump
• Para-gliding-landing with cygnus airbag safety system
• Pendolina system for railway passenger comfort
• Performance evaluation of methanol blended fuels in s. I. Engines
• Performance evaluation of solar still thermo electric mode
• Permanent magnet generator
• Perpetual motion machines
• Photo acoustics of small gas clouds
• Power frequency magnetic fields
• Power from space for use on earth
• Power generation by compressed air final
• Power generation by using road speed breakers
• Power system contingencies
• Practical fuel-cell vehicles
• Problems and control of backfire for hydrogen
• Process quality model in scm performance measurements
• Processing and tribo behaviour of nylon clay nanocomposites under abrasive wear mode
• Protein encapsulation using u.v peg hydrogels
• Proton exchange membrane fuel cell
• Pseudoelasticity and shape memory in metal nanowires
• Quasiturbine future trends in automobile engine
• Rapid prototyping technique based on 3d welding
• Redesign of brake assembly of formula sae car
• Reliability redundancy design-using simulation
• Remote signal acquisition and interface unit for focal ultrasound surgery procedures
• Remote signal acquisition and signal processing for focal ultrasound surgical procedures
• Research on modified layers of material surface for cr12 mov cold die
• Secure user authentication using automated biometrics
• Selective catalytic reduction (scr)
• Shock absorber testing system
• Six – stroke hybrid engine
• Size reduction of window air conditioner
• Skid steer loader and multiterrain loader
• Solar chimney power generation system
• Solar energy conservation to hydrogen112
• Solar heat energy storage in phase change materials
• Study and design of waveguide notch filter for a frequency of 28 ghz.
• Tabletop thermoacoustic refrigerator for demonstrations
• Temporary house stairs that can be folded up and meet safety standards (used when building houses)
• The gyro machine : using non planar mechanism
• The hy-wire car
• Thermo acoustic refrigeration
• Thread locking device for handling thread at flexible endoscopy
• Topographic characterization and modeling of the precision surface grinding process
• Triptronic automatic gear transmission
• Turbine technology in automobile
• Ultrasonic nondestructive testing
• Ultrasonic phased array for defect cartlization
• Underwater acoustic data communication
• Underwater welding
• Underwater wind mill
• Unmanned mine spotter
• Valvetronic engine technology
• Vibration analysis of flywheel using finite element analysis
• Water diesel emulsion with high injection press
• Water jet cutting technology